Copy the products from an interface (KLF 200) to VELUX Touch

This article shows you how to copy the products controlled by an existing VELUX Touch interface (KLF 200) in order to finalise the setup of your new VELUX Touch.
Prepare your interface KLF 200 to send a copy of the products to your new VELUX Touch.
Please follow the steps described below:

1. Locate your interface, and turn it around to access the product key button (small key icon) on the cable side.
2. Press and hold the product key button while watching the green LED flash slowly at first before shifting to a little faster flashing sequence.
3. Release the product key button to start sending the copy.

Now return to your VELUX Touch to complete the product transfer and installation.
Note: The product transfer has to be completed within a maximum of 2 minutes.