Step 1
Ensure all blinds are in the fully open position.
Step 2
Press the reset button located on the KUX 110 contol unit for at least 5 seconds.

Step 3
The blind will move up and down several times, before coming to rest.
Step 4
You now have 10-minutes to reset the handset and register the product.
Step 5
Reset handset or wall switch
 Go to Steps 6-8 |  Go to Steps 9-11o Gog gggasdStepSs |  Go to Steps 12-16 |  Go to Steps 17-22 |
Step 6
Press the reset button on the back of the handset for 1 second using a paper clip or similar.

Step 7
Press the central button, and then the downward arrow button within 3 seconds of each other.

Step 8
The blind can now be operated.
Step 9
For a KLI 310 or KLI 312, press the 'pair' symbol on the bottom of the wall switch for 1 second, using a pin or similar

Step 10
Secondly, press the central button, and the downward arrow button within 3 seconds of each other.

Step 11
The blinds can now be operated.
Step 12
Tap the home symbol, then the '+' in the top right.
Step 13
Tap 'New Product'

Step 14
Tap 'Add New Products'

Step 15
Tap the 'Arrow' in the top right corner of the screen.

Step 16
The blind can now be operated.
Step 17
Press 'Menu' on the handset.
Step 18
Press 'System Settings'
Step 19
Press 'Register Product', and then press 'Enter'.
Step 20
Press 'Register Product', and then press 'Enter'. The registration process will now run.
This can take up to 2 minutes to complete.
Step 21
The display will now show 'New Product Registered'.
Step 22
The blind can now be operated.