VELUX sun tunnel by Lovegrove
- Installation – What is required?
- For Sun Tunnels purchased between 2008 and 2010, a PZ screwdriver is required for installation. For those purchased 2010 onwards, a Torx 15 is required.
Full installation instructions can be download here
- In what types of roofs is it possible to install a VELUX Sun Tunnel?
- A VELUX Sun Tunnel can be installed in both sloped, with slate and tile roof coverings, and also flat roof constructions. You find further information on the VELUX Sun Tunnel here.
- Which VELUX Sun Tunnel can the Lovegrove Lamp be fixed to?
- Sun Tunnel by Lovegrove can be installed on all 14” models (not available in 10”) with product code 2010E1 (purchased 2008 onwards).
- Is DIY installation possible?
- Yes, if you feel confident, it is possible to install the product yourself. You loosen 2 of the 4 screws in the light spreader approximately 15 mm. After that you install the fixture from the new ZTB 014 1001 and later you tighten the screws again. Full installation instructions can be downloaded here.
Alternatively, you can contact an installer/builder.
- Is it possible to get light in your VELUX Sun Tunnel by Lovegrove when it is dark?
- Yes, it is possible to install a light kit (ZTL 014L - purchased separately), where the light source is an energy saving LED bulb. The light kit offers light day and night and it is possible to install it later. LED bulb is enclosed.
The installation must be done by an authorised electrician.
- How do you clean the VELUX Sun Tunnel by Lovegrove?
- We recommend wiping the product with a damp soft cotton cloth. Washing-up liquid can be added to the water if required.
DO NOT use spirit (isopropanole) since it will damage the gloss and the colour of the product.
|
|